Single Arm Hydraulic Sawing Machine Combination

Shandong Sambin Machine Co,.Ltd supply the single arm hydraulic stone sawing machine with high quality and high precision.The thickness error of the stone plate produced by this machine is very small.The single arm hydraulic stone sawing machine is an ideal machine for stone materials processing.If you want to know more,please send an inquiry to us...
 

Product Introduction of the Single Arm Hydraulic Stone Sawing Machine

The single arm hydraulic stone sawing machine is based on the combination saw, then optimized and improved.This adopts the structure with four columns and hydraulic locking ,so its overall rigidity is best and the clearance is small, it can reduce the shaking caused in the cutting process .Then the plate produced by the machine has high precision and good flatness .At the same time, it has a great good effects in improving the service life of the cutter head and reducing the power consumption.

The column is a unique combined double sealing device,it greatly reduce the wear of the dust on the machine components,which is beneficial to extend the service life of the machine .And its special lubrication system greatly reduce the number of the maintenance and reduces the possibility of component wear. The single arm hydraulic stone sawing machine produced by our company is a stone cutting machine with comprehensive improvement.

Product Parameter of the Single Arm Hydraulic Stone Sawing Machine

Product Feature And Application of the Single Arm Hydraulic Stone Sawing Machine

1. The elevator guide pin is made of four round steels with electroplated, it has the advantages of small clearance ,good overall rigidity, small shaking during cutting and long service life.

2. The machine adopts the special hydraulic locking device, which can reduce the clearance of the fuselage in the process of cutting or there is wear on the machine, which is helpful to improve the smoothness of the sheet stone and prolong the service life of the cutter head.

3. Pillar lifting is lubricated with grease (commonly known as butter), which is added only once every three months at most. The maintenance times are greatly reduced.

4. The contact surface between the lifting guide pillar and the mid-seat adopts the surface rolling guide sleeve (oil-free self-lubricating bearing) made of PTFE polymer material from DuPont, USA. The guide sleeve surface is rolled into a circular oil storage pit, which can work normally under the condition of less oil or gap oil breakage. It has the advantages of low friction coefficient, good wear resistance and long service life.

5. The lifting cylinder adopts imported oil seals, including five sets of piston seals consisting of an elastic sealing ring, two retaining rings and two guiding rings, which can prolong the service life several times than the common oil seals.

6. Hydraulic and electrical components adopt excellent accessories at home and abroad.

Production Details of the Single Arm Hydraulic Stone Sawing Machine

1. The water cover cover is made of PVC material, light and convenient.

2. The water cover is made of 3mm thick steel plate, and the interior is made of asphalt for anti-embroidery treatment.

3. Fuel tank assembly - oil pump; solenoid valve etc. Use the advanced material.

4. The trolley is strengthened with double layers around the national standard channel steel. The wheels of the trolley are increased by 250mm (bearing 6411 or 6312) and the wheels of the material are made of steel 215mm (bearing 7210)

Production Qualification of the Single Arm Hydraulic Stone Sawing Machine

FAQ 

Q:What is your packing?

A: Pack the nude with plastic film and wire fixing.

Q:Do you have the service after sale?

A:Our marketing team will respond to your questions within 23hours ,technical support is available at any time.

Latest News 

Stone machinery is not only the main production tool of stone enterprises, but also an important part of fixed assets. In the process of using stone machinery, it is not only the process of producing products and creating profits, but also the process of wear and tear itself, and wear and tear is one of the main reasons for the failure of stone machinery. But the reason why the stone machinery industry strives to stabilize the market in the upstream is a combination of many factors.

First of all, the overall development situation of stone machinery industry is good, while maintaining a stable trend of upward trend, it is also a new step in export earning. In 2007, China's export of stone machinery and equipment exceeded 3 billion US dollars, becoming the world's largest exporter of stone. The Secretary-General of the Stone Chamber of Commerce of the All-China Federation of Industry and Commerce recently said, "Now, China has not only ranked the first in the world in raw materials and output of stone, but also surpassed Italy in processing.

Reasons for stabilizing the market: 1.

The structure of production, supply and export trade of China's stone machinery industry has undergone fundamental changes. It is reported that there are nearly 1,000 advanced stone machinery production lines in China at present. These advanced production lines are the main factors that directly lead to the upgrading of China's stone industry structure. The process of qualitative change not only reflects the fine changes of China's current industrial structure and trade structure, but also highlights the improvement of production, processing technology and product quality of China's stone machinery industry. So the reason why stone machinery wins the market is that it is in charge.

Reasons for stabilizing the market II:

Contradictions and problems will arise in the adjustment of stone machinery industry, but market-oriented, focusing on the production of high-grade new stone products and stone products, we should speed up the development of advanced mining and processing technology, improve the relationship between new production capacity and total balance, and persist in combining development with elimination so as to accelerate the development of advanced technology and promote the elimination of backward technology. Continuously optimize the technical structure and industrial structure of the stone industry, and ultimately optimize the market structure of China's stone machinery. Therefore, to win the market for stone machinery is to carry out its own reform according to the changes of the market, which is in line with the development of the market.

Reasons for stabilizing the market: 3.

The prosperity and development of the stone machinery industry has led to the expansion and sustained prosperity of the stone equipment manufacturing industry. Especially in recent years, with the development of the construction industry, the demand for various types and specifications of stone products has increased rapidly. The stone machinery industry has greatly promoted the development of stone processing machinery and tools. The price competition and shorter delivery time of construction projects and commemorative projects force the production methods of natural stone processing industry to continue to rationalize, which makes the stone machinery and equipment manufacturers constantly optimize their products.

Reasons for stabilizing the market 4:

In recent years, through imitation innovation, integrated innovation and independent research and development, domestic stone processing equipment has developed rapidly, and has greatly improved the research and development and manufacturing level of high-end products of stone processing machinery and equipment, and achieved remarkable results.

The newly emerged stone machinery has raised a new step for stone mining and processing methods, breaking the traditional situation of mining and processing. Therefore, it is considerable for stone machinery to stabilize the industry market and strive for the upper reaches.