You may not be unfamiliar withstone sawing machine. Sambin Mahcinery Co.,Ltdhave many types, including single-arm stone sawing machine, multi-slice bridge stone sawing machine, bridge type diamond disc sawing machine, and so on. The stone sawing machine relates to the improvement of the structure of the stone sawing machine. The utility model aims at the above problems, and provides astone sawing machinewith high production efficiency, which is not easy to damage the disc saw when encountering greater resistance.

　　The utility model comprises a frame, whose main structural points are that the two sides of the transverse sawmill on the frame are respectively left longitudinal sawmill and right longitudinal sawmill, and the lower part of the right longitudinal sawmill is provided with a feeding truck with a bracket, and the door beam between the right longitudinal sawmill and the transverse sawmill is a crane door beam, the lower part of the door beam is a bracket, a hydraulic cylinder, and the lower part of the transverse sawmill is a fixed frame, a bracket and a liquid The sawmill consists of a gantry frame and a chassis. The motor on the chassis engages with the rack on the chassis through gears, connects with the saw arm on the chassis shaft through the pulley group of the gantry frame through ropes, connects with the motor on the saw arm, and fixes the sawmill on the guide rail of the chassis through the wheels.

　　Next, we will talk about the safe operation rules ofstone sawing machineproduced by our company. In order to be safe, we hope that all the teachers will operate according to the correct operation rules.

　　1. Check power supply voltage and water supply system. Place the specimen on the worktable and fix it with fixture.

　　2. Close the boxes of the saw and open the water supply system.

　　3. Turn on the power supply and turn on the power switch, and adjust the running speed of the tool according to the hardness of the specimen.

　　4. Open the switch and start working until the sawmill has finished its journey and returned to its starting point.

　　5. Close thestone sawing machine, close the water supply system and take out the samples.

　　6. In normal cutting process, if abnormal noise of the main engine is found, the cutter should be withdrawn immediately and stopped for inspection; and the fast-forward button can not be pressed, otherwise the blade and equipment will be damaged; in the cutting process, the cold water should be checked at any time to prevent the blade from wearing or jamming.

　　7. After use, the residual rock slag on the working table surface should be cleaned in time, the water stains on the blade and the working table should be wiped off, and the lubricating oil on the tool Trailer plate and the guide rail should be added.