Home >Knowledge
Products Categories
  • Stone Cutting Machine
  • Stone Polishing Machine
  • Special Shaped Stone Processing Equipment
  • Stone Carving Machine
  • Stone Machine Parts
Contact Us
  • ADDRESS:No. 586 Donghai Third Road, Binzhou City, Shandong Province China

  • MOBILE:+8613954319798

  • E-MAIL:  Scarlett@sambin.net

  •                   Darren@sambin.net

  • TEL:+86-543-3351885

Talk About the Characteristics and Operating Regulations of Single Arm Combined Stone Sawing Machine
2019-03-08 10:06:47

Shandong Sambing Machine Co.,Ltd is a high-quality company specializing in research and development, manufacture of stone processing equipment, such as bridge-type sawing machine, infrared bridge type stone cutting machine, single-arm combined stone sawing machine, stone carving machine and so on. Its products are widely sold at home and abroad. The production involves precision casting, mechanical processing, metal logistics, international trade and other fields.

Below we will explain in detail the characteristics of the single-arm combined stone sawing machine for you, first look at the single-arm combined stone sawing machine, the frame of the single-arm saw machine is connected on the rigid frame column with two-way separate cantilever, in the cantilever end with a lifting arm, the lower end of the lifting arm with a diamond circular saw, the top with a spindle drive motor; the lifting arm with a lifting vertical screw; the feeding truck with adjustments; Speed motor. The advantages of single-arm combined stone sawing machine are: small size, light weight and large input torque; single-arm or double-arm sawing operation, simple structure and flexible operation; circular saw can have three rotational speeds, feed truck can speed up, and can meet the needs of different hardness of stone sawing speed. It is suitable for the sawing and cutting of various stone materials.

The feed screw of the worktable car of the single arm combined stone sawing machine is equipped with protective device and clearance adjusting device, which greatly improves the service life and slicing accuracy of the screw. The cycloidal pin reducer is used to drive the lifting screw to use saw blade for lifting and lifting, which is convenient for maintenance and low failure rate. The latest four-column hydraulic lifting can also be selected, and the lifting is stable and fast. It combines the advantages of large saws and cutting machines, with high efficiency and low consumption.

单臂石材切割机

In the process of using the single arm combined stone sawing machine, the following operating procedures and specifications must be paid attention to. Here is a brief introduction of Shandong Sambin Machine Co.,Ltd.

1. Machine installation must be stable, grounding wire or power supply through leakage protector must be provided, cutting stone without adding water is strictly prohibited.

2. It is strictly forbidden to press the button of both input and return parts. After the work is finished, the residual rock slag on the working table should be cleaned and the water on the blade and the working table should be wiped clean.

3. Clean the advance and retreat guide rails and screw of the worktable and apply lubricating oil. Butter oil is added regularly to the spindle, screw shaft and transmission axle at both ends.

4. After the whole machine is used, if it is not used for a certain period of time, the moving parts of blades and fixtures and some rusty parts in the machine should be coated with anti-rust oil.

Lasted News

Lasted News

24 hours at your service:

Scarlett@sambin.net

Contact Us