Infrared medium sized stone trimming machine adopts long-span bridge structure, with large degree of processing, large cutting depth, safe and stable operation, and is often used to process roadside stones and tombstone. In the process of operation of Infrared medium sized stone trimming machine, if the operation is inaccurate and the maintenance is improper, the equipment of Infrared medium sized stone trimming machine is prone to mechanical failure. So, in order to maintain the normal operation of the Infrared medium sized stone trimming machine, what measures should we take?

1. Infrared medium sized stone trimming machine and its surroundings must be kept clean and tidy, and no dust or dirt should be left.

2. The traveling parts of the Infrared medium sized stone trimming machine (including cable groove plates) must be cleaned regularly and kept clean. No obstacles should be left.

3.Cutter mainframe must add oil once a month and change oil every six months.

4. Butter is beaten once a week on both sides of the gear rows. The lubricating oil of the sliding track is checked once a month. The lubricating oil must be added to the same height of the sliding track. The row of teeth should be thoroughly cleaned every six months and repainted with butter.

5. In the course of operation of Infrared medium sized stone trimming machine, when water cut off or other faults occur, the cutter holder should be lifted immediately and shut down for inspection.

6.Maintain the line of lifting arm landing and sliding switch in good condition, lubricate the movable joints of claw regularly, and check the rubber pad of claw to ensure the normal work of claw.