Stone cutting is a necessary process in the process of slab processing. Only by cutting the slab can it become a building material convenient for subsequent processing. The stone cutting machine is a kind of mechanical equipment for cutting stone. The stone cut by the stone cutting machine is flat and in good shape, and can be well used in subsequent polishing and polishing processes. The cutting efficiency and accuracy of the stone cutting machine are high, which is very suitable for cutting a large number of stone materials. In order to use the stone cutting machine well and for a long time, we must pay attention to the maintenance of the stone cutting machine in daily operation. Here, Shandong Sambin Machine Co., Ltd. will introduce several aspects of maintenance of stone cutting machine in daily life.

1. When the machine is not activated after the stone is clamped, it is strictly forbidden to move the blade so as not to damage the blade when the blade touches the stone.

2. The test block must be firmly clamped to prevent loosening.

3. After the test block is clamped, wipe the water stains on your hands with a dry towel, and then operate the button.

4. When disassembling the blade, clamp the E-card in the two small holes of the rear spindle pulley, and pull the locking nut of the spindle blade clockwise with a special wrench (note: the E-card must be removed after operation).

5. If the main belt of the stone cutting machine is loose, the belt should be tightened in time.