There are several poins of the using matters of bridge disc cutting machine in running-in period:

1 . Because construction machinery, such as bridge disc cutting machine is a special vehicle, operators should be trained and coached by manufacturers, have a full understanding of the structure and function of the machine, and obtain certain operation and protection experience to operate the machine.The instructions for the protection of the use of commodities are the necessary materials for the operator to operate the equipment. Before operating the bridge dics cutting machine, the manufacturer must first read the instructions for the protection of the use and operate and maintain the instructions according to the requirements of the instructions.

2. Pay attention to the working load of the bridge disc cutting machine during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and organize the appropriate workload to avoid the overheating caused by the long-term continuous work of the machine.

3. Pay attention to the investigation of the appearance instructions, if there is abnormalities, should be promptly parked to be cleaned up, before the elements are found or the fault is cleaned up, should stop working.

4. Pay attention to check the level and quality of smooth oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and pay attention to the sealing of the whole machine. In view of the shortage of oil and water, we should analyze the elements. Together, the smoothness of each smooth point should be strengthened, and it is advocated that smoothness point should be injected with smoothness grease in each shift during the running-in period (especially when requested).

5. Adhere to the cleanliness of the bridge disc stone machine, adjust and tighten loose parts in time, in order to prevent parts from worsening or losing due to loosening.

6. When the running-in period is over, the bridge disc stone machine should be maintained forcibly, the inspection and adjustment should be done well, and the replacement of oil should be noticed together.