As an auxiliary tool to help people improve work efficiency and reduce workload, mechanical equipment must undergo a certain process inspection before it is put into production. On the one hand, because of the vast market at present, the quality of equipment is uncertain. On the other hand, the operator can be more familiar with the equipment after a certain process of inspection, which is convenient for future operation. Therefore, the mechanical equipment must be debugged. Bridge disc stone sawing machine is a high efficiency equipment specially used for cutting stone. So, how to debug the bridge disc stone sawing machine before it is put into use?

1. Check the wiring diagram carefully to ensure that there is no mistake before starting.

2. Use the method of manual turning to check the firmness of the motors and the tightness of the belts and chains, and adjust them to the best condition.

3. Check the operation of each transmission mechanism to ensure the operation, flexible movement, no obvious jamming phenomenon and stable connection.

4. Check the correctness and firmness of parts and components.

5. Check the correctness and firmness of each protective (dust-proof) device.

6. Check the operation of each control handle and button, and ensure its sensitivity and effectiveness. When all the above checks have been completed, all lubrication places should be lubricated with oil, and the oil injected should be kept clean. At this time, part of the test run can be carried out one by one.