The stone polishing machine is a manual electric tool for polishing metal surface. The polishing machine specializes in the surface and tube treatment of metal products such as steel, aluminium and copper. Dozens of original fittings meet different needs. It is easy to produce various kinds of snow pattern, drawing pattern, wavy pattern, matte surface and mirror surface with different precision. It can quickly repair deep scratches and slight scratches, and quickly grinding and polishing.

The key of stone polishing machine operation is to get the maximum polishing speed so as to remove the damaged layer caused by polishing as soon as possible. At the same time, the polishing damage layer will not affect the final observed tissue, that is, it will not cause false tissue. The former requires the use of coarse abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polishing damage layer is deeper; the latter requires the use of the finest materials to make the polished damage layer shallow, but the polishing rate is low.

How to install hand lifting stone grinding and polishing machine?

1. Carefully observe the drawings of the hand lifting stone grinding and polishing machine. When the drawings are purchased, sellers will give them away, so as to avoid errors in installation and affect the use. Keep in mind the installation position and size of each part of the hand lifting stone grinding and polishing machine and watch it at any time. When purchasing, it is necessary to select a standard hand lifting stone grinding and polishing machine.

2. Install the core of hand lifting stone grinding and polishing machine. Installation drawings will be used to prepare the parts used, and clean one by one, clean or not clean may affect the installation of the hand lifting stone grinding and polishing machine. After cleaning up, place the base of hand lifting stone grinding and polishing machine in the position needed to be installed, let the vertical column and the ground vertical, pour the cement into the hole, wait for the cement to become solid, about 8 or 9 days, different seasons, solidification time is different. When cement becomes solid, it can play a fixed role. Tighten the screw with a screwdriver and so on. Then check whether the base is flat or not. The error should be avoided as far as possible. The above information is constantly checked, there are no errors, fill the base of hand lifting stone grinding and polishing machine with cement, and then use tools to smear, to achieve smooth.

3. The most important part of installing the hand lifting stone grinding and polishing machine is the motor. Place the motor on its base, install this part well, and then adjust and tighten it to see if it is installed correctly.