Infrared bridge type stone cutting machine belongs to high-precision cutting machinery. It needs special technicians to provide technical guidance and install it according to the equipment procedure to ensure the reliability of the construction period. Below we will tell you about the preparation of infrared bridge type stone trimming machine before trial operation:

1. Make a comprehensive inspection of the whole external connection and fastener of the infrared bridge type stone cutting machine to confirm that the connection and fastening are good.

2. The reducer, spindle box, rotating part and moving part of the infrared bridge type cutting machine should be filled with lubricating oil according to the regulations.

3. Connect the power supply of infrared bridge type stone cutting machine

4. Check whether the indicators of the infrared bridge type stone cutting machine are normal.

5. Check whether the emergency stop button of the infrared bridge type stone cutting machine is reliable and effective; the infrared bridge type stone cutting machine belongs to the computer control, only need to lift on the control panel, speed and other technical operation items.

Next, I will talk about the matters needing attention in the operation of Sambin stone cutting machine.

1. When working in a stone cutting machine factory, the fuselage must be grounded, and it is strictly forbidden to work off the ground.

2. The stone cutter is directional and reversal is strictly prohibited, otherwise it will cause damage to the machine and personal safety.

3. The stone cutter cleans the workbench in time and releases the accumulated water and sediment in the water tank after stopping the machine. Strictly prevent the impact of heavy objects on the working table.

4. When the stone cutting machine is not used for a long time, it should be stored in a dry and clean place.