Stone cutting is a process that must be passed through during the processing of stone plates.Through the cutting of stone plates, it can become a building material for convenient subsequent processing.The stone cutting machine is a mechanical device for cutting stone.The stone cut by the stone cutting machine is flat and has the right shape, which can be well invested in the subsequent grinding and polishing process. The stone cutting machine has high cutting efficiency and high precision, which is very suitable for a large number of stone cutting.For the good and long-term use of the stone cutting machine, we must pay attention to the maintenance of the stone cutting machine in daily operation.

1. When the machine is not activated after the stone is clamped,  the blade is prohibited from moving , so as to prevent the blade from hitting the stone and damaging the blade.

2. The test block must be firmly clamped to prevent loosening.

3. After the test block is clamped, wipe the water stain on the hand with a dry towel, and then operate the button.

4. When removing the blade, insert the E-type card into the two small holes of the rear spindle pulley, and use a special wrench to pull the spindle blade lock nut clockwise (note: the E-type card must be removed after the operation)

5. If it is found that the belt of the stone cutting machine is loose, the belt should be tightened in time.