In the use of stone polishing machine , there is often a stain on the surface of the chine due to the impurities generated in the cutting process, which affects the use of stone machine. The stone polishing machine is a high efficiency stone equipment, in the use of the process because of the cutting intensity, often splashed stone residues adhere to the surface of the saw. Over time, the accumulation of stains will greatly affect the cutting process of the saw. So, after a long period of use, how should the saw be cleaned?

Before cleaning, it is necessary to turn off the mechanical power switch to ensure that the stone polishing machine is cleaned without electricity.

In the process of the cleaning, non-metallic hammer bars can be used to knock the oil pipeline continuously or discontinuously to remove the attachments in the pipeline.

In general,cleaning the hydraulic sawdust machine , often use the hydraulic oil or test oil for work. Kerosene, gasoline, alcohol, steam or other liquids should not be used to prevent corrosion of hydraulic components, pipelines, tanks and seals. The cleaning time is generally (48-60) hours, which should be determined by the complexity of the system, the requirements of filtering accuracy and the degree of pollution.

In order to prevent rust caused by external humidity, the hydraulic pump will continue to operate until the temperature returns to normal at the end of cleaning. After cleaning, the cleaning oil in the circuit should be removed.